Batch analysis

If you have multiple scans to analyze, you can use the batch_giwaxs_analysis_pyfai.ipynb notebook. This notebook follows the same processing steps as the one used in the previous sections and requires the same input parameters.

However, there are some key differences:

1. Specifying the list of scans

You need to define the list of scans to be processed, using pairs of scan numbers corresponding to the two detector angles (gamma_A and gamma_B).

# List of pairs of scan numbers corresponding to (gamma_A, gamma_B)
scan_list = [(5151, 5152), (5153,5154)]

2. Performing azimuthal integration on multiple domains

You can specify multiple integration regions for different azimuthal scans. The integration domains should be listed in the following format:

# AZIMUTHAL SCAN
# List of integration domains
# Format : (left_tth, right_tth, bottom_chi, top_chi), all in deg
domain_list = [(4, 4.4, -90, -40), (3.2, 3.8, -50, 0)]

Running the batch processing

Once all the parameters are set, you can run the entire notebook. The processed data will be automatically exported into individual subfolders within the processed_data/ directory.